Magnus 1250 – 400 V, 152 m³/h (at 10 m), stainless steel impeller, 9.20 kW
Category: Pumps for public pools ID: 573MAG1250S
Product information
Magnus Pumps
• High-volume self-priming pump with a large-capacity pre-filter, ideal for larger filtration systems
• The first robust plastic pump achieving the performance characteristics of a cast-iron or bronze pump
• Stainless steel impeller
• Pump body and diffuser made of glass-fibre reinforced polypropylene for extended service life
• Large pre-filter combined with excellent hydraulic performance ensures extremely high filtration capacity
• Transparent polycarbonate lid with four-lock closure for easy pre-filter inspection
• Stainless steel (AISI 316) pump shaft is not in contact with the pumped water – suitable for use with salt and seawater when fitted with an AISI 316 mechanical seal
• Motor bearings with lifetime lubrication for long service life and quiet operation – lower speed = lower noise and wear = longer service life compared to standard pumps
• Lower motor operating temperature, motor protection rating IP55
• Connection by Ø 110 mm flanges (flange not included)
• Each unit is tested and has its own individual test certificate with measured technical data, attached to the back of the manual
Packaging
- Number of products per package:
- 1
- Number of products per pallet:
- 1
- Gross weight (kg):
- 84.5
FILTER COWER SCREW MAGNUS
TOP COVER PREFILTR MAGNUS
SEAL LID MAGNUS
BASKET OF PRE-FILTER MAGNUS
PREFILTER BODY MAGNUS
DRAIN STOPPER MAGNUS 1/2"
DRAIN STOPPER O-RING
FILTER COVER NUT MAGNUS
DIFFUSER MAGNUS 4 300/400
DIFFUSER MAGNUS-4
IMPELLER PLUG+SCREW MAGNUS M
IMPELLER PLUG O-RING
TURBINE MAGNUS-4 300
TURBÍNA MAGNUS-4 250
TURBINE MAGNUS-4 400
TURBINE MAGNUS-4 550
IMPELLER MAGNUS-4 750
IMPELLER MAGNUS-4 1000 SS
IMPELLER MAGNUS-4 750 BRZ
IMPELLER MAGNUS-4 1000 BRONZE
TURBINE MAGNUS-2 1250 BRONZE
KIT IMPELLER MAGNUS -4 1000
SEALING SEGMENT MAGNUS/CONTRA
PUMP BODY COVER JOINT MAGNUS
PUMP BODY COVER MAGNUS 300-550
PUMP BODY COVER MAGNUS750-1500
PUMP BODY MAGNUS
PRE-FILTER BODY O-RING MAGNUS
MAGNUS MOTOR FLANGE MEC.132
ANTI VOLUTE MAGNUS-4
BEARING 6308 ZZ C3
FAN MAGNUS
IMPELLER PLUG+SCREW MAGNUS A4
NTC TEMPERATURE PROBE
Specifications
- Flow:
- 152 m3/h
- RPM:
- 2850 rpm
- Pre-filter:
- yes
- For salt water above 5 g/l (>0,5%)):
- Power consumption:
- kW
- Voltage:
- 400/690 V
- Output:
- kW
- Self-priming:
- yes
- Engine coverage:
- IP55
- For salt water up to 5 g/l (<0.5%):
- yes
- Body material:
- Max. work pressure:
- bar
- For sea water:
- yes
- Engine bearings with life-lasting lubrication:
- yes
- Turbine material:
- Suction / discharge connection - bonding:
- mm
- Output current:
- A
- Product type:
- Suction / discharge connection - flange :
- 110 / 110 mm
- Product line:
- Magnus