RAPID INVERTER IPHC300T Heat Pump – 110 kW with Cooling
Category: Heat pumps ID: 565IPHC300T
Product information
All devices filled with coolant of more than 5 tons CO2 equivalent must, in acordance with regulation (EU) No 517/2014 of the European Parliament and of the Council, undergo a tightness test of the cooling circuit prior to device commissioning and then every 12 months. The tightness check must be entered into the device records book.
RAPID INVERTER Professional with full inverter technology and cooling
Recommended for public pools
Rapid Inverter Professional is a full-inverter pool heat pump, powered by full-inverter compressor and full inverter fan motor, which adjusts the compressor speed hertz, and the fan speed round by round. It matches pool intelligently with continuous and optimal efficiency. The Rapid Inverter Professional heat pump allows the heating capacity from 25% to 100% automatically according to pool demand, but most of the time, it only runs by middle and low speed for maximum efficiency.
When Rapid Inverter Professional runs by middle and low speed to maintain the pool temperature, the compressor and fan run super quietly. The Rapid Inverter Professional averagely runs by COP up to 16 (at Air 26°C/Water 26°C/Humidity 80%) depends on pool size.
Energy saving – up to 2x compared to a conventional heat pump
Cooling capacity: 54 kW
Packaging
- Number of products per package:
- 1
- Gross weight (kg):
- 483
INVERT. BOARD IPHC150T/300TNEW
INVERTER BOARD IPHC150T/300T
PC BOARD (HEAT + COOL)
PC BOARD (HEAT + COOL)
TOUCH CONTROLLER IPHC
Contactor 1
Contactor 2
Reactor
POWER FILTER PLATE
FAN MOTOR CURRENT DETECTOR
Electronic expansion valve
4-way valve
FLOW SWITCH IPH
FAN MOTOR IPHC300T
Fuse
Full set of sensors
Compressor
Titanium heat exchanger(Heat&Cool)
Evaporator (left)
Evaporator (right)
High pressure protection switch
Low pressure protection switch
HIGH+LOW PRESSURE VALVE
WATER UNION IPHC300T
Fan
Compressor insulation cap
Front middle pole
Front right pole
Rear left pole
Rear middle pole
Rear right pole
Back panel
Left panel
Rear left panel
Front left panel
Rear right panel
Right panel
Bottom board
Specifications
- For salt water above 5 g/l (>0,5%)):
- Yes
- Voltage:
- 400 V
- Color:
- Black
- For salt water up to 5 g/l (<0.5%):
- yes
- For sea water:
- yes
- Flow monitoring:
- yes
- Digital display:
- Yes
- Heating power:
- 110 kW
- Recommended pool volume:
- 260 - 520 m3
- Operating temperature:
- -7 ~ +43 °C
- Recommended water flow:
- XII.18 m3/h
- Rated current:
- 6,77-25,4 A
- Rated power:
- 4,69-17,6 kW
- Heat exchanger:
- Titanium
- Net dimensions (w/l/h):
- 2100x1090x1280 mm
- Net transport weight kg:
- 459 kg
- Digital control panel:
- yes
- El. expansion valve:
- yes
- Compressor:
- Double rotary Built in
- Pressure circuit welded with silver:
- yes
- Refrigerant used:
- R410A
- Cooling:
- yes
- Efficiency:
- 10 C.O.P.
- Material - view area:
- Aluminium alloy
- Easy to install:
- yes
- Defrosting:
- yes
- Connection:
- 110 mm
- Product type: